|
14.6V Series 12V LiFePO4 Battery Charger | |||||||||||||||||||||||
| ■ Features | ||||||||||||||||||||||||
| ·Universal AC input / Full range | ||||||||||||||||||||||||
| ·Plastic or metal case optional | ||||||||||||||||||||||||
| ·Cooling by free air convection | ||||||||||||||||||||||||
| ·MTBF:30000 hours | ||||||||||||||||||||||||
| ·Provide 3 years warranty | ||||||||||||||||||||||||
| ·Install fuses on both ends of the Input and Output for double safety | ||||||||||||||||||||||||
| ·Protections:Short circuit / Over load / Over voltage / Over temperature | ||||||||||||||||||||||||
| ·Meet CEC,DoE Level VI,Energy star,ErP stage 2,CoC Tier 2,NRCan & GEMS | ||||||||||||||||||||||||
| ·Certification:UL,ETL,CUL,GS,CE,BS,SAA,KC,PSE,CB,FCC,EMC,RoHS,REACH | ||||||||||||||||||||||||
| SPECIFICATION | ||||||||||||||||||||||||
| OUTPUT | MODEL NO. |
FY1462000
|
FY1463000
|
FY1464000
|
FY1465000
|
FY1466000
|
FY1507000
|
FY1469900
|
FY14615000
|
FY14620000
|
||||||||||||||
| OUTPUT VOLTAGE | 9-14.6V | 9-14.6V | 9-14.6V | 9-14.6V | 9-14.6V | 9-14.6V | 9-14.6V | 9-14.6V | 9-14.6V | |||||||||||||||
| OUTPUT CURRENT | 2A | 3A | 4A | 5A | 6A | 7A | 10A | 15A | 20A | |||||||||||||||
| OUTPUT POWER | 29.2W | 43.8W | 58.4W | 73W | 87.6W | 102.2W | 146W | 219W | 292W | |||||||||||||||
| PFC (MIN.) | 0.6 | 0.6 | 0.6 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | |||||||||||||||
| RIPPLE & NOISE (max.) | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | |||||||||||||||
| INPUT | INPUT VOLTAGE RANGE | 100 ~ 240VAC | ||||||||||||||||||||||
| FREQUENCY RANGE | 50 / 60Hz | |||||||||||||||||||||||
| INPUT POWER | NO LOAD: 0.5W MAX AT INPUT 100-240VAC 50/60Hz . LOADING : 150W MAX , AT RATED OUTPUT . | |||||||||||||||||||||||
| TEMPERATURE RISING | CASE 65 ℃ MAX .℃ FOR RATED OUTPUT | |||||||||||||||||||||||
| EFFICIENCY (MIN) | 88% | |||||||||||||||||||||||
| DIELECTRIC WITHSTAND TEST | 5mA 3000VAC FOR 60 SECOND BETWEEN INPUT AND OUTPUT INPUT AND CASE, AT AN ALTERNATIVE POTENIALS 5% HIGHER MAY BE APPLIED FOR 1 SECOND | |||||||||||||||||||||||
| PROTECTION | OVER LOAD | THE PRODCT INCLUDES CURRENT FUSE TYPE 250V 3A LOCATED WITHIN INPUT CIRCUIT | ||||||||||||||||||||||
| SHORT CIRCUIT: | CAPABLE OF WITHSTANDING CONTINUOUS SHORT CIRCUIT AND RECOVER AUTOMATICALLY | |||||||||||||||||||||||
| ENVIRONMENT | WORKING TEMP RANGE | THE OPERATIN TEMPERATURE OF THE PRODUCT SHALL BY FROM -29 ℃ TO + 45 ℃ | ||||||||||||||||||||||
| STORAGE TEMPERATURE | THE STORAGE TEMPERATURE OF THE PRODUCT SHALL BY FROM -40 ℃ TO + 75 ℃ | |||||||||||||||||||||||
| RESISTANCE TO HEAT | WHEN TESTED WITHIN 10 MINUTES AFTER PRODUCT HAS BEEN PLACED IN A TEST CHAMBER MAINTAINED AT105 ±3℃ FOR 16 HOURS , THE PRODUCT SHALL COMPLYVAC WITH THE REQUIREMENTS OF 4.7 , DIELECTRIC WITHSTAND TEST , SHALL HAVE INSULATION RESISTANCS NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE INPUT AND THE OUTPUT, INPUT AND CASE TOGETHER , 10 MEGOHMS MINIMUM | |||||||||||||||||||||||
| RESISTANCE TO MOISTURE | THE PRODUCT SHALL BY PLACED IN A TEST CHAMBER MAINTAINED AT 40 ± 2 ℃ AT 90% ~ 95% RELATIVE HUMIDITY FOR 6 HOURS . THEN , WHEN TESTING 10 MINUTES SAFTER THE PRODUCT IS TAKEN OUT FROM THE TEST CHAMBER AND WIPED DRY , THE PRODUCT SHALL COMPLY WITH THE REQUIREMENTS OF 4.7 DIELECTRIC WITHSTAND TEST , AND SHALL HAVE INSULATION RESISTANCE NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE PRIMARY AND THE SECONDARY TOGETHER;10 MEGOHMS MINIMUM BETWEEN A SECONDRY THER SECONDRY AND TOGETHER. | |||||||||||||||||||||||
| SAFETY & EMC | SAFETY STANDARDS | UL60950 EN60335 | ||||||||||||||||||||||
| EMI | CISPR22 CLASS | |||||||||||||||||||||||
| INSULATION | B | |||||||||||||||||||||||
| OTHERS | MTBF | THEVDESIGN AND CONSTRUCTION OF THIS PRODUCT EXHIBIT A MINIMUM MEAN TIME BETWEEN FAILURE OF 30000 HOURS FULL RATED LOAD OPERATION AT 25 ℃ | ||||||||||||||||||||||
| CONNECTOR | PLUG | 5521, 5525, RCA, XLR, XT60, M16, C14. | ||||||||||||||||||||||
| CABLE | UL2464 18# 1M length | |||||||||||||||||||||||
