|
58.8V Series For 48V Lead-Acid Battery Charger | ||||||||||||||||||||||
| ■ Features | |||||||||||||||||||||||
| ·Universal AC input / Full range | |||||||||||||||||||||||
| ·Plastic or metal case optional | |||||||||||||||||||||||
| ·Cooling by free air convection | |||||||||||||||||||||||
| ·MTBF:30000 hours | |||||||||||||||||||||||
| ·Provide 3 years warranty | |||||||||||||||||||||||
| ·Install fuses on both ends of the Input and Output for double safety | |||||||||||||||||||||||
| ·Protections:Short circuit / Over load / Over voltage / Over temperature | |||||||||||||||||||||||
| ·Meet CEC,DoE Level VI,Energy star,ErP stage 2,CoC Tier 2,NRCan & GEMS | |||||||||||||||||||||||
| ·Certification:UL,ETL,CUL,GS,CE,BS,SAA,KC,PSE,CB,FCC,EMC,RoHS,REACH | |||||||||||||||||||||||
| SPECIFICATION | |||||||||||||||||||||||
| OUTPUT | MODEL NO. |
FY5801000
|
FY5802000
|
FY5803000
|
FY5803500
|
FY5804000
|
FY5805000
|
FY5806000
|
FY5807000
|
||||||||||||||
| OUTPUT VOLTAGE | 34-58.8V | 34-58.8V | 34-58.8V | 34-58.8V | 34-58.8V | 34-58.8V | 34-58.8V | 34-58.8V | |||||||||||||||
| OUTPUT CURRENT | 1A | 2A | 3A | 3.5A | 4A | 5A | 6A | 7A | |||||||||||||||
| OUTPUT POWER | 58.8W | 117.6W | 176.4W | 205.8W | 235.2W | 294W | 352.8W | 411.6W | |||||||||||||||
| PFC (MIN.) | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | |||||||||||||||
| RIPPLE & NOISE (max.) | 580mVp-p | 580mVp-p | 580mVp-p | 580mVp-p | 580mVp-p | 580mVp-p | 580mVp-p | 580mVp-p | |||||||||||||||
| INPUT | INPUT VOLTAGE RANGE | 100 ~ 240VAC | |||||||||||||||||||||
| FREQUENCY RANGE | 50 / 60Hz | ||||||||||||||||||||||
| INPUT POWER | NO LOAD: 0.5W MAX AT INPUT 100-240VAC 50/60Hz . LOADING : 450W MAX , AT RATED OUTPUT . | ||||||||||||||||||||||
| TEMPERATURE RISING | CASE 65 ℃ MAX .℃ FOR RATED OUTPUT | ||||||||||||||||||||||
| EFFICIENCY (MIN) | 88% | ||||||||||||||||||||||
| DIELECTRIC WITHSTAND TEST | 5mA 3000VAC FOR 60 SECOND BETWEEN INPUT AND OUTPUT INPUT AND CASE, AT AN ALTERNATIVE POTENIALS 5% HIGHER MAY BE APPLIED FOR 1 SECOND | ||||||||||||||||||||||
| PROTECTION | OVER LOAD | THE PRODCT INCLUDES CURRENT FUSE TYPE 250V 3A LOCATED WITHIN INPUT CIRCUIT | |||||||||||||||||||||
| SHORT CIRCUIT: | CAPABLE OF WITHSTANDING CONTINUOUS SHORT CIRCUIT AND RECOVER AUTOMATICALLY | ||||||||||||||||||||||
| ENVIRONMENT | WORKING TEMP RANGE | THE OPERATIN TEMPERATURE OF THE PRODUCT SHALL BY FROM -29 ℃ TO + 45 ℃ | |||||||||||||||||||||
| STORAGE TEMPERATURE | THE STORAGE TEMPERATURE OF THE PRODUCT SHALL BY FROM -40 ℃ TO + 75 ℃ | ||||||||||||||||||||||
| RESISTANCE TO HEAT | WHEN TESTED WITHIN 10 MINUTES AFTER PRODUCT HAS BEEN PLACED IN A TEST CHAMBER MAINTAINED AT105 ±3℃ FOR 16 HOURS , THE PRODUCT SHALL COMPLYVAC WITH THE REQUIREMENTS OF 4.7 , DIELECTRIC WITHSTAND TEST , SHALL HAVE INSULATION RESISTANCS NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE INPUT AND THE OUTPUT, INPUT AND CASE TOGETHER , 10 MEGOHMS MINIMUM | ||||||||||||||||||||||
| RESISTANCE TO MOISTURE | THE PRODUCT SHALL BY PLACED IN A TEST CHAMBER MAINTAINED AT 40 ± 2 ℃ AT 90% ~ 95% RELATIVE HUMIDITY FOR 6 HOURS . THEN , WHEN TESTING 10 MINUTES SAFTER THE PRODUCT IS TAKEN OUT FROM THE TEST CHAMBER AND WIPED DRY , THE PRODUCT SHALL COMPLY WITH THE REQUIREMENTS OF 4.7 DIELECTRIC WITHSTAND TEST , AND SHALL HAVE INSULATION RESISTANCE NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE PRIMARY AND THE SECONDARY TOGETHER;10 MEGOHMS MINIMUM BETWEEN A SECONDRY THER SECONDRY AND TOGETHER. | ||||||||||||||||||||||
| SAFETY & EMC | SAFETY STANDARDS | UL60950 EN60335 | |||||||||||||||||||||
| EMI | CISPR22 CLASS | ||||||||||||||||||||||
| INSULATION | B | ||||||||||||||||||||||
| OTHERS | MTBF | THEVDESIGN AND CONSTRUCTION OF THIS PRODUCT EXHIBIT A MINIMUM MEAN TIME BETWEEN FAILURE OF 30000 HOURS FULL RATED LOAD OPERATION AT 25 ℃ | |||||||||||||||||||||
| CONNECTOR | PLUG | 5521, 5525, RCA, XLR, XT60, M16, C14. | |||||||||||||||||||||
| CABLE | UL2464 18# 1M length | ||||||||||||||||||||||
