|
|
60W Switching powe supply | ||||||||||
| ■ Features | |||||||||||
| ·Universal AC input / Full range | |||||||||||
| ·Plastic or metal case optional | |||||||||||
| ·Cooling by free air convection | |||||||||||
| ·MTBF:30000 hours | |||||||||||
| ·Provide 3 years warranty | |||||||||||
| ·Install fuses on both ends of the Input and Output for double safety | |||||||||||
| ·Protections:Short circuit / Over load / Over voltage / Over temperature | |||||||||||
| ·Meet CEC,DoE Level VI,Energy star,ErP stage 2,CoC Tier 2,NRCan & GEMS | |||||||||||
| ·Certification:UL,ETL,CUL,GS,CE,BS,SAA,KC,PSE,CB,FCC,EMC,RoHS,REACH | |||||||||||
| SPECIFICATION | |||||||||||
| OUTPUT | MODEL NO. |
FY0503000
|
FY1203000
|
FY1204000
|
FY1503000
|
FY1903000
|
FY2402000
|
FY3601000
|
FY4801000
|
||
| OUTPUT VOLTAGE | 5V | 12V | 12V | 15V | 19V | 24V | 36V | 48V | |||
| OUTPUT CURRENT | 3A | 3A | 4A | 3A | 3A | 2A | 1A | 1A | |||
| OUTPUT POWER | 15W | 36W | 48W | 45W | 47W | 48W | 36W | 48W | |||
| PFC (MIN.) | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | |||
| RIPPLE & NOISE (max.) | 50mVp-p | 120mVp-p | 120mVp-p | 150mVp-p | 190mVp-p | 240mVp-p | 360mVp-p | 480mVp-p | |||
| INPUT | INPUT VOLTAGE RANGE | 100 ~ 240VAC | |||||||||
| FREQUENCY RANGE | 50 / 60Hz | ||||||||||
| INPUT POWER | NO LOAD: 0.5W MAX AT INPUT 100-240VAC 50/60Hz . LOADING : 70W MAX , AT RATED OUTPUT . | ||||||||||
| TEMPERATURE RISING | CASE 65 ℃ MAX .℃ FOR RATED OUTPUT | ||||||||||
| EFFICIENCY (MIN) | 88% | ||||||||||
| DIELECTRIC WITHSTAND TEST | 5mA 3000VAC FOR 60 SECOND BETWEEN INPUT AND OUTPUT INPUT AND CASE, AT AN ALTERNATIVE POTENIALS 5% HIGHER MAY BE APPLIED FOR 1 SECOND | ||||||||||
| PROTECTION | OVER LOAD | THE PRODCT INCLUDES CURRENT FUSE TYPE 250V 3A LOCATED WITHIN INPUT CIRCUIT | |||||||||
| SHORT CIRCUIT: | CAPABLE OF WITHSTANDING CONTINUOUS SHORT CIRCUIT AND RECOVER AUTOMATICALLY | ||||||||||
| ENVIRONMENT | WORKING TEMP RANGE | THE OPERATIN TEMPERATURE OF THE PRODUCT SHALL BY FROM -29 ℃ TO + 45 ℃ | |||||||||
| STORAGE TEMPERATURE | THE STORAGE TEMPERATURE OF THE PRODUCT SHALL BY FROM -40 ℃ TO + 75 ℃ | ||||||||||
| RESISTANCE TO HEAT | WHEN TESTED WITHIN 10 MINUTES AFTER PRODUCT HAS BEEN PLACED IN A TEST CHAMBER MAINTAINED AT105 ±3℃ FOR 16 HOURS , THE PRODUCT SHALL COMPLYVAC WITH THE REQUIREMENTS OF 4.7 , DIELECTRIC WITHSTAND TEST , SHALL HAVE INSULATION RESISTANCS NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE INPUT AND THE OUTPUT, INPUT AND CASE TOGETHER , 10 MEGOHMS MINIMUM | ||||||||||
| RESISTANCE TO MOISTURE | THE PRODUCT SHALL BY PLACED IN A TEST CHAMBER MAINTAINED AT 40 ± 2 ℃ AT 90% ~ 95% RELATIVE HUMIDITY FOR 6 HOURS . THEN , WHEN TESTING 10 MINUTES SAFTER THE PRODUCT IS TAKEN OUT FROM THE TEST CHAMBER AND WIPED DRY , THE PRODUCT SHALL COMPLY WITH THE REQUIREMENTS OF 4.7 DIELECTRIC WITHSTAND TEST , AND SHALL HAVE INSULATION RESISTANCE NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE PRIMARY AND THE SECONDARY TOGETHER;10 MEGOHMS MINIMUM BETWEEN A SECONDRY THER SECONDRY AND TOGETHER. | ||||||||||
| SAFETY & EMC | SAFETY STANDARDS | UL60950 EN61558 EN60950 | |||||||||
| EMI | CISPR22 CLASS | ||||||||||
| INSULATION | B | ||||||||||
| OTHERS | MTBF | THEVDESIGN AND CONSTRUCTION OF THIS PRODUCT EXHIBIT A MINIMUM MEAN TIME BETWEEN FAILURE OF 30000 HOURS FULL RATED LOAD OPERATION AT 25 ℃ | |||||||||
| DIMENSION | 113*44*30mm (L*W*H) | ||||||||||
| PACKING | 350g/pcs; 48pcs/17Kg/CARTON（53*37*21cm) | ||||||||||
| CONNECTOR | PLUG | 5521, 5525 | |||||||||
| CABLE | UL2464 18# 1M length | ||||||||||
