 |
80W Series Switching power supply | |||||||||||
| ■ Features | ||||||||||||
| ·Universal AC input / Full range | ||||||||||||
| ·Plastic or metal case optional | ||||||||||||
| ·Cooling by free air convection | ||||||||||||
| ·MTBF:30000 hours | ||||||||||||
| ·Provide 3 years warranty | ||||||||||||
| ·Install fuses on both ends of the Input and Output for double safety | ||||||||||||
| ·Protections:Short circuit / Over load / Over voltage / Over temperature | ||||||||||||
| ·Meet CEC,DoE Level VI,Energy star,ErP stage 2,CoC Tier 2,NRCan & GEMS | ||||||||||||
| ·Certification:UL,ETL,CUL,GS,CE,BS,SAA,KC,PSE,CB,FCC,EMC,RoHS,REACH | ||||||||||||
| SPECIFICATION | ||||||||||||
| OUTPUT | MODEL NO. |
FY1205000
|
FY1206000
|
FY1904750
|
FY2403000
|
FY3602000
|
FY4801500
|
|||||
| OUTPUT VOLTAGE | 12V | 12V | 19V | 24V | 36V | 48V | ||||||
| OUTPUT CURRENT | 5A | 6A | 4.75A | 3A | 2A | 1.5A | ||||||
| OUTPUT POWER | 60W | 72W | 90.25W | 72W | 72W | 72W | ||||||
| PFC (MIN.) | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | ||||||
| RIPPLE & NOISE (max.) | 120mVp-p | 120mVp-p | 190mVp-p | 240mVp-p | 360mVp-p | 480mVp-p | ||||||
| INPUT | INPUT VOLTAGE RANGE | 100 ~ 240VAC | ||||||||||
| FREQUENCY RANGE | 50 / 60Hz | |||||||||||
| INPUT POWER | NO LOAD: 0.5W MAX AT INPUT 100-240VAC 50/60Hz . LOADING : 90W MAX , AT RATED OUTPUT . | |||||||||||
| TEMPERATURE RISING | CASE 75℃ MAX .℃ FOR RATED OUTPUT | |||||||||||
| EFFICIENCY (MIN) | 90% | |||||||||||
| DIELECTRIC WITHSTAND TEST | 5mA 3000VAC FOR 60 SECOND BETWEEN INPUT AND OUTPUT INPUT AND CASE, AT AN ALTERNATIVE POTENIALS 5% HIGHER MAY BE APPLIED FOR 1 SECOND | |||||||||||
| PROTECTION | OVER LOAD | THE PRODCT INCLUDES CURRENT FUSE TYPE 250V 3A LOCATED WITHIN INPUT CIRCUIT | ||||||||||
| SHORT CIRCUIT: | CAPABLE OF WITHSTANDING CONTINUOUS SHORT CIRCUIT AND RECOVER AUTOMATICALLY | |||||||||||
| ENVIRONMENT | WORKING TEMP RANGE | THE OPERATIN TEMPERATURE OF THE PRODUCT SHALL BY FROM -29 ℃ TO + 45 ℃ | ||||||||||
| STORAGE TEMPERATURE | THE STORAGE TEMPERATURE OF THE PRODUCT SHALL BY FROM -40 ℃ TO + 75 ℃ | |||||||||||
| RESISTANCE TO HEAT | WHEN TESTED WITHIN 10 MINUTES AFTER PRODUCT HAS BEEN PLACED IN A TEST CHAMBER MAINTAINED AT105 ±3℃ FOR 16 HOURS , THE PRODUCT SHALL COMPLYVAC WITH THE REQUIREMENTS OF 4.7 , DIELECTRIC WITHSTAND TEST , SHALL HAVE INSULATION RESISTANCS NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE INPUT AND THE OUTPUT, INPUT AND CASE TOGETHER , 10 MEGOHMS MINIMUM | |||||||||||
| RESISTANCE TO MOISTURE | THE PRODUCT SHALL BY PLACED IN A TEST CHAMBER MAINTAINED AT 40 ± 2 ℃ AT 90% ~ 95% RELATIVE HUMIDITY FOR 6 HOURS . THEN , WHEN TESTING 10 MINUTES SAFTER THE PRODUCT IS TAKEN OUT FROM THE TEST CHAMBER AND WIPED DRY , THE PRODUCT SHALL COMPLY WITH THE REQUIREMENTS OF 4.7 DIELECTRIC WITHSTAND TEST , AND SHALL HAVE INSULATION RESISTANCE NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE PRIMARY AND THE SECONDARY TOGETHER;10 MEGOHMS MINIMUM BETWEEN A SECONDRY THER SECONDRY AND TOGETHER | |||||||||||
| SAFETY & EMC | SAFETY STANDARDS | UL60950 EN61558 | ||||||||||
| EMI | CISPR22 CLASS | |||||||||||
| INSULATION | B | |||||||||||
| OTHERS | MTBF | THEVDESIGN AND CONSTRUCTION OF THIS PRODUCT EXHIBIT A MINIMUM MEAN TIME BETWEEN FAILURE OF 30000 HOURS FULL RATED LOAD OPERATION AT 25 ℃ | ||||||||||
| DIMENSION | 133*58*31mm (L*W*H) | |||||||||||
| PACKING | 400g/pcs; 48pcs/20Kg/CARTON（53*37*21cm） | |||||||||||
| CONNECTOR | PLUG | 5.5*2.1, 5.5*2.5 | ||||||||||
| CABLE | UL2464 18# 1M length | |||||||||||
