200W 電源適配器

200W 電源適配器

型號︰FYxxxyyyy

品牌︰Fuyuang

原產地︰-

單價︰-

最少訂量︰100 件

現在查詢

產品描述

     
   
 
 
200W Series Switching power supply 
■ Features
·Universal AC input / Full range
·Plastic or metal case optional
·Cooling by free air convection
·MTBF:30000 hours
·Provide 3 years warranty
·Install fuses on both ends of the Input and Output for double safety
·Protections:Short circuit / Over load / Over voltage / Over temperature
·Meet CEC,DoE Level VI,Energy star,ErP stage 2,CoC Tier 2,NRCan & GEMS
·Certification:UL,ETL,CUL,GS,CE,BS,SAA,KC,PSE,CB,FCC,EMC,RoHS,REACH
SPECIFICATION
OUTPUT MODEL NO.

FY1209000

FY1209900

FY12012000

FY12016000

Y2406000

FY2407000

FY2408000

FY3605000

OUTPUT VOLTAGE                   12V 12V 12V 12V 24V 24V 24V 36V
OUTPUT CURRENT  9A 10A  12A 16A 6A 7A 8A 5A
OUTPUT POWER 108W 120W 144W 192W 144W 168W 192W 180W
PFC (MIN.) 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9
RIPPLE & NOISE (max.) 120mVp-p 120mVp-p 120mVp-p 120mVp-p 240mVp-p 240mVp-p 240mVp-p 360mVp-p
INPUT INPUT VOLTAGE RANGE 100 ~ 240VAC   
FREQUENCY RANGE 50 / 60Hz
INPUT POWER NO LOAD: 0.5W MAX   AT INPUT 100-240VAC  50/60Hz .   LOADING :   200W MAX , AT RATED OUTPUT .
TEMPERATURE RISING CASE 65℃ MAX .℃ FOR RATED OUTPUT
EFFICIENCY (MIN) 90%
DIELECTRIC WITHSTAND TEST 5mA 3000VAC FOR 60 SECOND BETWEEN INPUT AND OUTPUT INPUT AND CASE, AT AN ALTERNATIVE POTENIALS 5% HIGHER MAY BE APPLIED FOR 1 SECOND 
PROTECTION OVER LOAD THE PRODCT INCLUDES CURRENT FUSE TYPE 250V 3A LOCATED WITHIN INPUT CIRCUIT
SHORT CIRCUIT: CAPABLE OF WITHSTANDING CONTINUOUS SHORT CIRCUIT AND RECOVER AUTOMATICALLY
ENVIRONMENT WORKING TEMP RANGE THE OPERATIN TEMPERATURE OF THE PRODUCT SHALL BY FROM  -29 ℃ TO + 45 ℃
STORAGE TEMPERATURE THE STORAGE TEMPERATURE OF THE PRODUCT SHALL BY FROM  -40 ℃ TO + 75 ℃
RESISTANCE TO HEAT WHEN TESTED WITHIN 10 MINUTES AFTER PRODUCT HAS BEEN PLACED IN A TEST CHAMBER MAINTAINED AT105 ±3℃ FOR 16 HOURS , THE PRODUCT SHALL COMPLYVAC WITH THE REQUIREMENTS OF 4.7 , DIELECTRIC WITHSTAND TEST , SHALL HAVE INSULATION RESISTANCS NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE INPUT AND THE OUTPUT, INPUT AND CASE TOGETHER , 10 MEGOHMS MINIMUM.
 
RESISTANCE TO MOISTURE THE PRODUCT SHALL BY PLACED IN A TEST CHAMBER MAINTAINED AT   40 ± 2 ℃    AT                      90% ~ 95% RELATIVE HUMIDITY FOR 6 HOURS . THEN , WHEN TESTING 10 MINUTES SAFTER THE PRODUCT IS TAKEN OUT FROM THE TEST CHAMBER AND WIPED DRY , THE PRODUCT SHALL COMPLY WITH THE REQUIREMENTS OF 4.7 DIELECTRIC WITHSTAND TEST , AND SHALL HAVE INSULATION RESISTANCE NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE PRIMARY AND THE SECONDARY TOGETHER;10 MEGOHMS MINIMUM BETWEEN A SECONDRY THER SECONDRY AND TOGETHER.
SAFETY & EMC SAFETY STANDARDS UL60950   EN60950 EN61558
EMI CISPR22 CLASS
INSULATION B
OTHERS MTBF THEVDESIGN AND CONSTRUCTION OF THIS PRODUCT EXHIBIT A MINIMUM MEAN TIME BETWEEN FAILURE OF 30000 HOURS FULL RATED LOAD OPERATION AT 25 ℃
DIMENSION 178*80*46mm  (L*W*H)
PACKING 780g/pcs;   18pcs/15Kg/CARTON(47*28*28cm)
CONNECTOR PLUG 5.5*2.1, 5.5*2.5,4pin
CABLE UL2464 18# 1M length