|
|
200W Series Switching power supply |
| ■ Features |
| ·Universal AC input / Full range |
| ·Plastic or metal case optional |
| ·Cooling by free air convection |
| ·MTBF:30000 hours |
| ·Provide 3 years warranty |
| ·Install fuses on both ends of the Input and Output for double safety |
| ·Protections:Short circuit / Over load / Over voltage / Over temperature |
| ·Meet CEC,DoE Level VI,Energy star,ErP stage 2,CoC Tier 2,NRCan & GEMS |
| ·Certification:UL,ETL,CUL,GS,CE,BS,SAA,KC,PSE,CB,FCC,EMC,RoHS,REACH |
| SPECIFICATION |
| OUTPUT |
MODEL NO. |
FY1209000
|
FY1209900
|
FY12012000
|
FY12016000
|
Y2406000
|
FY2407000
|
FY2408000
|
FY3605000
|
| OUTPUT VOLTAGE |
12V |
12V |
12V |
12V |
24V |
24V |
24V |
36V |
| OUTPUT CURRENT |
9A |
10A |
12A |
16A |
6A |
7A |
8A |
5A |
| OUTPUT POWER |
108W |
120W |
144W |
192W |
144W |
168W |
192W |
180W |
| PFC (MIN.) |
0.9 |
0.9 |
0.9 |
0.9 |
0.9 |
0.9 |
0.9 |
0.9 |
| RIPPLE & NOISE (max.) |
120mVp-p |
120mVp-p |
120mVp-p |
120mVp-p |
240mVp-p |
240mVp-p |
240mVp-p |
360mVp-p |
| INPUT |
INPUT VOLTAGE RANGE |
100 ~ 240VAC |
| FREQUENCY RANGE |
50 / 60Hz |
| INPUT POWER |
NO LOAD: 0.5W MAX AT INPUT 100-240VAC 50/60Hz . LOADING : 200W MAX , AT RATED OUTPUT . |
| TEMPERATURE RISING |
CASE 65℃ MAX .℃ FOR RATED OUTPUT |
| EFFICIENCY (MIN) |
90% |
| DIELECTRIC WITHSTAND TEST |
5mA 3000VAC FOR 60 SECOND BETWEEN INPUT AND OUTPUT INPUT AND CASE, AT AN ALTERNATIVE POTENIALS 5% HIGHER MAY BE APPLIED FOR 1 SECOND |
| PROTECTION |
OVER LOAD |
THE PRODCT INCLUDES CURRENT FUSE TYPE 250V 3A LOCATED WITHIN INPUT CIRCUIT |
| SHORT CIRCUIT: |
CAPABLE OF WITHSTANDING CONTINUOUS SHORT CIRCUIT AND RECOVER AUTOMATICALLY |
| ENVIRONMENT |
WORKING TEMP RANGE |
THE OPERATIN TEMPERATURE OF THE PRODUCT SHALL BY FROM -29 ℃ TO + 45 ℃ |
| STORAGE TEMPERATURE |
THE STORAGE TEMPERATURE OF THE PRODUCT SHALL BY FROM -40 ℃ TO + 75 ℃ |
| RESISTANCE TO HEAT |
WHEN TESTED WITHIN 10 MINUTES AFTER PRODUCT HAS BEEN PLACED IN A TEST CHAMBER MAINTAINED AT105 ±3℃ FOR 16 HOURS , THE PRODUCT SHALL COMPLYVAC WITH THE REQUIREMENTS OF 4.7 , DIELECTRIC WITHSTAND TEST , SHALL HAVE INSULATION RESISTANCS NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE INPUT AND THE OUTPUT, INPUT AND CASE TOGETHER , 10 MEGOHMS MINIMUM. |
| |
| RESISTANCE TO MOISTURE |
THE PRODUCT SHALL BY PLACED IN A TEST CHAMBER MAINTAINED AT 40 ± 2 ℃ AT 90% ~ 95% RELATIVE HUMIDITY FOR 6 HOURS . THEN , WHEN TESTING 10 MINUTES SAFTER THE PRODUCT IS TAKEN OUT FROM THE TEST CHAMBER AND WIPED DRY , THE PRODUCT SHALL COMPLY WITH THE REQUIREMENTS OF 4.7 DIELECTRIC WITHSTAND TEST , AND SHALL HAVE INSULATION RESISTANCE NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE PRIMARY AND THE SECONDARY TOGETHER;10 MEGOHMS MINIMUM BETWEEN A SECONDRY THER SECONDRY AND TOGETHER. |
| SAFETY & EMC |
SAFETY STANDARDS |
UL60950 EN60950 EN61558 |
| EMI |
CISPR22 CLASS |
| INSULATION |
B |
| OTHERS |
MTBF |
THEVDESIGN AND CONSTRUCTION OF THIS PRODUCT EXHIBIT A MINIMUM MEAN TIME BETWEEN FAILURE OF 30000 HOURS FULL RATED LOAD OPERATION AT 25 ℃ |
| DIMENSION |
178*80*46mm (L*W*H) |
| PACKING |
780g/pcs; 18pcs/15Kg/CARTON（47*28*28cm） |
| CONNECTOR |
PLUG |
5.5*2.1, 5.5*2.5,4pin |
| CABLE |
UL2464 18# 1M length |
